PRO Meth Водяной насос 190 PSI для систем впрыска водометанола ProMetPum190

eatures Include:

Pressure adjustable from 100-300 PSI

3/8 NPT female inlet & outlet port

Motor turns 2200 RPM @ 12 volts

16.5 amperage draw

Built-in bypass valve

Built-in thermal protection

Built-in anti reverse check valve

Built-in heat sink on back of motor

Heavy duty dual EPDM pump seals

Pressure adjustable from 100-300 PSI

Can run dry up to 1 hour without damage

100% methanol compatible

Tested prior to shipping

Made in the USA

Weight 6.2 lbs



Flow & Horsepower Ratings @ 13.5 Volts:

1.7 gallons per minute open flow

190 liters per hour @ 180 PSI

50 gallons per hour @ 180 PSI

3150 cubic centimeters @ 180 PSI

Supports up to 2500-4500 horsepower - 100% water mix

Supports up to 1500-1900 horsepower - 50/50 water methanol mix

Supports up to 1200-1600 horsepower - 100% methanol mix



Special Notes:

Do not use with petroleum products (E85, E98, gasoline, diesel, etc)

Use 12 gauge wire for power and ground

Does not include pump fittings. Pump fittings are available for sale separately

Pumps come preset at 220 PSI - Expect 4-5 years of service if pump pressure is left at 220 PSI or below

Running the pump over 250 PSI is not advised and will shorten pumps life

All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump

Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output

Pump may be mounted vertical or horizontal